Raising Arm

EB 950 CR, withstands direct impact forces in excess of 720KJ. The EB 950 CR has been independently physically tested in a number of full scale crash tests conducted in accordance with PAS 68 by the Transport Research Laboratory (TRL).

The EB 950 CR is an electro-hydraulically operated rising arm barrier with arm widths of up to 4.5m span. The barrier arm sits 1m above the roadway and is supported by two side support frames. During impact the arm slides into a locked position protecting the main drive mechanism from damage. Raised / lowered back indication signalling can be provided to enable remote monitoring of the barrier status on a real time basis (optional).

The hydraulic power pack is controlled by a programmable controller enabling connection of virtually any access control to the barrier. In the event of power failure a manual pump is provided to ensure operator control is maintained.

EB 1400 CR, withstands direct impact forces of 1,852KJ. The EB 1400 CR has been independently physically tested conducted in accordance with PAS 68 (7,500kg vehicle travelling at 50mph / 80kph) by the Transport Research Laboratory (TRL).

The EB 1400 CR is an electro-hydraulically operated rising arm barrier available with a range of arm widths. The barrier arm sits 900mm above the roadway and is supported by two side support frames.

EB 950 CR
Tested model
3,000mm W x 1,000mm H
V/7500[N2]/48/90:0/0

EB 1400 CR
Tested model
4,500mm clear width x 1,063.5mm H (ground to centre of beam)
V/7500[N3]/80/90:10.5/25.0

Bristorm can also provide a range of barriers for locations not requiring PAS 68 rating. Please contact the office for further information.