Bollard Protection

Bristorm bollards provide a high level of security against unauthorised access without the need for an outwardly aggressive appearance.

Designed to withstand direct impact forces in excess of 1,800KJ, the bollard provides protection from extreme Vehicle Borne Improvised Explosive Device (VBIED) attack to sites where aesthetics and public perception are a consideration.

Available with standard and shallow foundations allowing our fixed bollards to be erected above services with out compromising on protection. 

The bollards have been independently physically tested in a number of full scale crash tests conducted in accordance with PAS 68 by the Transport Research Laboratory (TRL) both as a single unit and duel arrangement.

The Bristorm bollard can be installed with an optional electro-hydraulically raising / lowering unit to allow for vehicle access within the protected perimeter. Giving a 1,000mm raised height, the unit comprises of a static sub-surface mounting tube and impact tube. Raised / lowered back indication signalling can be provided to enable remote monitoring of the bollard on a real time basis (optional).

The hydraulic power pack is controlled by a Programmable Logic Controller (PLC), enabling connection of virtually any access control system to the bollard. In addition, the Hydraulic Power Unit (HPU) can provide outputs for a number of bollards for simultaneous operation. In the event of power failure a manual pump is provided to ensure operator control is maintained.

 

 

SB 970 CR
V/7500[N2]/80/90:0/25

Bristorm Bollard
V/7500[N2]/80/90:0.8/18.1

Shallow Bollard

V/7500(N2)/48/90:0.0/0.0

Bristorm bollards can additionally be supplied in ornate or stainless steel finish as well as a range of bollards for locations not requiring PAS 68 rating. Please contact the office for further information.

Click here to download the Bristorm Bollard data sheet