Bristorm IVP

Bristorm Integrated Vehicle Personnel (IVP) fence provides an unrivalled range of anti-vehicle and anti-personnel performance within a very narrow fence line.  Bringing the Hostile Vehicle Mitigation (HVM) of Bristorm fence and anti-personnel protection into a single foundation, without altering the performance of either system.

The Bristorm IVP Dual-Post system connects a standard anti-personnel fence to the Bristorm line post socket within the single foundation.  

The Bristorm IVP system can be installed maintaining the respective BSI PAS 68 30, 40, 50 and LP Bristorm fence classifications.  The individual fence lines are then able to behave independently and resist attacks as if installed in isolation.

In the event of a vehicle impact the anti-personnel fence panels break away from their posts before the vehicle impacts the Bristorm fence.  The Bristorm fence then decelerates and repels the attacking vehicle.

Impact damage to the anti-personnel fence will be limited to a few bays, whilst the Bristorm wire rope remains in place to resist subsequent encroachment attempts.  Repair to the barrier could be completed within a few hours, restoring the perimeter to its full protective capability.

Increased levels of protection can be achieved by adding the Southwest Microwave IntrepidTM PIDS systems to either the anti-personnel fence or Bristorm wire ropes.

 

 

Bristorm IVP can be installed alongside the following:

Bristorm 30
Withstands attack by 7,500kg truck travelling at 30mph (48km/h).
Tested length 41.6m
V/7500[N3]/48/90:2/0
V/7500[N3]/64/45:2/0

Bristorm 40
Withstands attack by 7,500kg truck travelling at 40mph (64km/h).
Tested length 45.6m
V/7500[N3]/64/90:2/0
Tested length 100m
V/7500[N3]/64/90:4/0

Bristorm 50
Withstands attack by 7,500kg truck travelling at 50mph (80km/h).
Tested length 100m
V/7500[N3]/80/90:5/0

Bristorm LP
Withstands attack by 2,500kg 4 x 4 travelling at 40mph (64km/h).
Tested length 100m
V/2500[M3]/48/90:1.6/0
V/2500[M3]/64/90:3.2/0